Advantages:
1. Good high and low temp-resisting, anti-corrosion, anti- irradiating, anti-high-pressure
?. performances. And it has wide applicability.
2. Fine filling performance and plasticity. It needs not high the precision of sealing surface and the
??pre-tight stress is lesser.
3. It is easy to dismantle and is convenient to clean while overhauling so that the intensity of labor is
?. lightened greatly.
4. Higher mechanical strength and excellent resiliency.
5. It is not aged. Its service life and storing period are longer and can be used repeatedly.
6. Good impermeability.
7. It is simple for gasket manufacturing. It also can be processed in the overhauling site. This is
?. adaptive especially to the deformed gasket.
8. It can replace the iron gasket, asbestos gasket, metallic gasket, pure copper gasket as well as
?. those sealing gaskets manufacture with vegetable fiber mineral fibers and chemical fiber, and it
?. yet can compensate the defects of the gaskets mentioned above.
Usage:
It is suitable for use in corrosive media such as hot water, high temperature and high pressure vapor, hydrogen gas, ammonia, solvent, hydrocarbon, super low temperature liquid, etc., and is widely used in pipe, valve, pump, pressure container, heat exchanger, condensator, tower, shell cover, observation hole,, flange connection, water level gauge, liquid level gauge, crystallizer, survey meter, etc.
Specifications of Flexible graphite reinforcing composite gasket:
Type |
|
|
ATCN-003A |
SS304, 316 stainless steel, aluminum, and copper flat plate, etc. |
Φ8~3000mm |
ATCN-003B |
Carbon steel, 304,316 stainless steel, aluminum, and copper toothed plate, etc. |
ATCN-003C |
Different quantity of wires, 304,316 stainless steel netting and aluminum netting, etc. |
Remark:The product specification can be made according to the customer's requirements.
Main Technical indices of Flexible graphite reinforcing composite gasket:
Item |
Technical indices |
Item |
Technical indices |
Service pressure |
≤6.3Mpa |
Tensile strength |
460kgf/cm2 |
Service temperature |
-200~650℃ (Oxidizing medium≤450℃) |
Compressive strength |
1200kgf/cm2 |
Min. pre-tight pressure |
Y=30Mpa |
Resilience |
15~33% |
Density |
2~2.4g/cm3 |
Compressibility |
25~60% |
Permeability of nitrogen gas |
≤1X10-4cm3/s |
?? |
?? |
Remark:The above technical indices could be adjusted according to the customer's requirements. |